ADVANCED ELECTRO-PNEUMATIC PRACTICE SET

Air Supply Unit

1. Filter-Regulator Unit with 3/2-Way Distribution Valve – TPAK.C2000

• Technical Specifications

• The integrated device includes: 01 filter-regulator unit and 01 3/2-way shut-off valve
• The 3/2-way distribution valve is used to shut off and supply compressed air to all pneumatic components. Its function is similar to an “air supply power switch”.
• The 3/2-way distribution valve can be locked with a key to prevent students from opening it when there is no practical training session.
• Filtration rating: up to 5 micrometers
• Pressure adjustment range: 0.5 – 7 bar
• Quick connector size, inlet/outlet: Ø6 mm

• Main Components:

• 01 silencer
• 01 aluminum base
• 01 3/2-way shut-off valve
• 04 plastic feet
• 01 filter-regulator unit
• 02 quick connectors

2. Air Distribution Unit – TPAK.C6000

• Technical Specifications

• Number of ports: 09 ports
• Port size: 4 mm quick connector
• Inlet: Ø6 mm
• The air supply ports are one-way valve type. When no pneumatic tube is inserted, the valve automatically closes to prevent air leakage.

• Main Components:

• 01 aluminum base
• 01 quick connector
• 01 air manifold
• 04 plastic feet
• 09 self-locking quick connectors

3. Pressure Regulator with Pressure Gauge – TPAK.C4000

• Technical Specifications

• Number of ports: 02 ports
• Quick tube connector size: Ø4 mm
• Pressure adjustment range: 0.05 to 0.7 MPa
• Withstand pressure: 1 MPa

• Main Components:

• 01 filter-regulator unit with pressure gauge
• 01 aluminum base
• 04 plastic feet
• 02 quick connectors

4. Pressure Gauge 1 MPa – TPAK.D0100

• Technical Specifications

• Number of ports: 01 port
• Quick tube connector size: Ø4 mm
• Pressure display range: 0 to 1 MPa

• Main Components:

• 01 aluminum base
• 01 aluminum block
• 01 pressure gauge
• 04 plastic feet
• 02 one-way valves

Flow Control Devices

5. One-Way Flow Control Valve, Double Type – TPAK.P7000

• Technical Specifications

• Port size: 4 mm tube
• Working pressure range: 0.1 to 0.7 MPa, 1 to 7 bar

• Main Components:

• 01 aluminum base
• 04 plastic feet
• 04 valve clamps
• 02 one-way flow control valves

6. Throttle Valve with Adjustable Check Valve – TPAK.P7100

• Technical Specifications

• Integrated with a check valve and a throttle valve for adjusting airflow
• Port size: 4 mm tube
• Working pressure range: 0.1 to 1.0 MPa, 1 to 10 bar

• Main Components:

• 01 aluminum base
• 04 plastic feet
• 01 adjustable one-way flow control valve
• 02 quick connectors
• 02 valve clamps

Actuators

7. Single-Acting Cylinder – TPAK.N0100

• Number of ports: 01 port
• Bore diameter: 20 mm
• Stroke: 50 mm
• Spring return
• Working pressure range: 0.05 to 1 MPa
• Cylinder speed: 50 – 750 mm/s
• Integrated magnetic ring for use with sensors mounted on the cylinder body
• Spring return
• Electronic circuit board for electrical connection

8. Double-Acting Cylinder – TPAK.N2000

• Number of ports: 02 ports
• Bore diameter: 20 mm
• Stroke: 100 mm
• Working pressure range: 0.05 to 1 MPa
• Cylinder speed: 50 – 750 mm/s
• Integrated magnetic ring for use with sensors mounted on the cylinder body
• Electronic circuit board for electrical connection

9. Cylinder with Load – TPAK.N8000

• Technical Specifications

• Number of ports: 02 ports
• Cylinder bore/stroke: 20 mm / 50 mm

• Main Components:

• 01 aluminum base
• 04 plastic feet
• 01 cam
• 01 loaded cylinder
• 01 cylinder mounting flange

10. Load Unit for Cylinder – TPAK.N9000

• Technical Specifications

• Display range: 10 kg

• Main Components:

• 01 aluminum base
• 04 plastic feet
• 01 load unit

Other Pneumatic Components

11. Vacuum Suction Cup / Vacuum Generator – TPAK.R0100

• Technical Specifications

• Vacuum generator valve
• Working pressure range: 0.1 to 0.6 MPa
• Minimum vacuum pressure: -89 kPa
• Suction tube diameter: 1 mm
• Maximum flow rate: 26 L/min
• Air consumption: 52 L/min
• Connection port size: 1/8″
• 01 aluminum base
• 04 plastic feet:
• 03 quick connectors
• 01 vacuum generator valve
• 01 vacuum suction cup

Pneumatic Solenoid Valves

12. Normally Closed 3/2-Way Pneumatic Solenoid Valve, Single Coil – TPAK.K0100

• Technical Specifications

• Working pressure range: 0.15 to 0.7 MPa
• Response time: 25 ms or less, at 0.5 MPa pressure
• Normally closed valve type, NC
• Quick connection port: M4
• Spring return
• LED operation indicator with protection circuit
• Coil voltage: 24 VDC
• Electronic circuit board for electrical connection

13. Normally Closed 3/2-Way Pneumatic Solenoid Valve, Double Coil – TPAK.K1000

• Technical Specifications

• Number of ports: 03 ports
• Positions: 02
• Number of coils: 02
• Coil voltage: 24 VDC
• LED operation indicator with protection circuit
• Electronic circuit board for electrical connection

14. 5/2-Way Pneumatic Solenoid Valve, Single Coil – TPAK.L0100

• Technical Specifications

• Working pressure range: 0.15 to 0.7 MPa
• Response time: 15 ms or less
• Normally closed valve type, NC
• 4 mm quick connector
• Spring return and manual actuation
• LED operation indicator with protection circuit
• Coil voltage: 24 VDC
• Electronic circuit board for electrical connection

15. 5/2-Way Pneumatic Solenoid Valve, Double Coil – TPAK.L1000

• Technical Specifications

• Working pressure range: 0.1 to 0.7 MPa
• Response time: 15 ms or less
• Normally closed valve type, NC
• 4 mm quick connector
• Spring return
• LED operation indicator with protection circuit
• Coil voltage: 24 VDC
• Electronic circuit board for electrical connection

16. 5/3-Way Pneumatic Solenoid Valve, Closed-Center, Double Coil – TPAK.L4000

• Technical Specifications

• Number of ports: 05 ports
• Number of positions: 03
• Quick connector size: M4
• Working pressure range: 0.1 to 0.7 MPa
• Response time: 20 ms or less
• Closed-center position
• Spring return
• LED operation indicator with protection circuit
• Coil voltage: 24 VDC
• Electronic circuit board for electrical connection

17. Pneumatic Solenoid Valve Block Consisting of 2 Double-Coil 5/2-Way Valves and 1 Single-Coil Valve – TPAK.L3000

• Technical Specifications

• Number of valves: 3 pieces/set, including 2 double-coil 5/2-way valves and 1 single-coil valve
• Number of ports: 05 ports/valve
• Number of positions: 02
• Working pressure range: 0.1 to 0.7 MPa
• Response time: 20 ms or less
• Quick connector size: M5
• Coil voltage: 24 VDC
• Air tube diameter: 4 mm
• Spring return
• LED operation indicator with protection circuit
• Electronic circuit board for electrical connection

Control Modules

18. DC Power Supply Module – TPAK.A7300

• Technical Specifications

• Compliant with TCVN 5699-1:2010 and IEC 60335-1:2010 standards for power consumption and current, leakage current, and electric strength
• Input voltage: 100 – 240 VAC
• Output voltage: 24 VDC / 4.2 A
• Power: 100 W
• Short-circuit protection and LED indicator
• Module front panel:

• Printed electronic circuit with instruction graphics, anti-glare surface, and fingerprint-resistant finish
• Device I/O terminals are brought out to an intermediate push-in connector for convenient wiring.

• Device base:

• Dimensions: 167 x 41 x 33 mm, H x D1 x D2
• Upper and lower edges with R60 mm rounded profile
• Material: 1.5 mm aluminum alloy with scratch-resistant and fingerprint-resistant surface treatment
  + 1.7 mm aluminum slot for mounting the electronic circuit board
• Designed to incline at an angle of 3.5 degrees when placed on the tabletop
  + 03 aluminum grooves with a diameter of 2.5 mm, spaced at 76.5 mm and 86.5 mm

• Quick-fix mounting mechanism:

• Dimensions: 68.5 x 48 mm
• Spring-loaded elastic mechanism

• Main Components:

• 01 analog voltage display meter
• 01 DC power supply
• 01 illuminated power switch
• 01 single-phase socket with integrated fuse
• 01 power cable
• 01 electronic circuit board
• 01 aluminum housing
• 02 plastic end caps

19. Switch Installation Training Module, ON/OFF – TPAK.A1000

• Compliant with TCVN 5699-1:2010 and IEC 60335-1:2010 standards for power consumption and current, leakage current, and electric strength
• 2 mm plug sockets
• Two independent NO/NC contact pairs
• Module front panel:

• Printed electronic circuit with instruction graphics, anti-glare surface, and fingerprint-resistant finish
• Device I/O terminals are brought out to an intermediate push-in connector for convenient wiring.

• Device base:

• Dimensions: 167 x 41 x 33 mm, H x D1 x D2
• Upper and lower edges with R60 mm rounded profile
• Material: 1.5 mm aluminum alloy with scratch-resistant and fingerprint-resistant surface treatment
  + 1.7 mm aluminum slot for mounting the electronic circuit board
• Designed to incline at an angle of 3.5 degrees when placed on the tabletop
  + 03 aluminum grooves with a diameter of 2.5 mm, spaced at 76.5 mm and 86.5 mm

• Quick-fix mounting mechanism:

• Dimensions: 68.5 x 48 mm
• Spring-loaded elastic mechanism

20. Emergency Stop Switch – TPAK.A0100

• 2 mm plug sockets
• Red mushroom-head self-locking push button
• Module front panel:

• Printed electronic circuit with instruction graphics, anti-glare surface, and fingerprint-resistant finish
• Device I/O terminals are brought out to an intermediate push-in connector for convenient wiring.

• Device base:

• Dimensions: 167 x 41 x 33 mm, H x D1 x D2
• Upper and lower edges with R60 mm rounded profile
• Material: 1.5 mm aluminum alloy with scratch-resistant and fingerprint-resistant surface treatment
  + 1.7 mm aluminum slot for mounting the electronic circuit board
• Designed to incline at an angle of 3.5 degrees when placed on the tabletop
  + 03 aluminum grooves with a diameter of 2.5 mm, spaced at 76.5 mm and 86.5 mm

• Quick-fix mounting mechanism:

• Dimensions: 68.5 x 48 mm
• Spring-loaded elastic mechanism

21. Push-Button Installation Training Module – TPAK.A3200

• Compliant with TCVN 5699-1:2010 and IEC 60335-1:2010 standards for power consumption and current, leakage current, and electric strength
• Power supply: 24 VDC
• 3 input push buttons, including 1 maintained push button
• Maximum load current through contact: 1 A
• Module front panel:

• Printed electronic circuit with instruction graphics, anti-glare surface, and fingerprint-resistant finish
• Device I/O terminals are brought out to an intermediate push-in connector for convenient wiring.

• Device base:

• Dimensions: 167 x 41 x 33 mm, H x D1 x D2
• Upper and lower edges with R60 mm rounded profile
• Material: 1.5 mm aluminum alloy with scratch-resistant and fingerprint-resistant surface treatment
  + 1.7 mm aluminum slot for mounting the electronic circuit board
• Designed to incline at an angle of 3.5 degrees when placed on the tabletop
  + 03 aluminum grooves with a diameter of 2.5 mm, spaced at 76.5 mm and 86.5 mm

• Quick-fix mounting mechanism:

• Dimensions: 68.5 x 48 mm
• Spring-loaded elastic mechanism

22. Intermediate Relay Installation Training Module – TPAK.A9100

• Compliant with TCVN 5699-1:2010 and IEC 60335-1:2010 standards for power consumption and current, leakage current, and electric strength
• OMRON components
• Coil voltage: 24 VDC
• 3 relays, each relay having 2 pairs of contacts
• Contact current: 5 A
• Module front panel:

• Printed electronic circuit with instruction graphics, anti-glare surface, and fingerprint-resistant finish
• Device I/O terminals are brought out to an intermediate push-in connector for convenient wiring.

• Device base:

• Dimensions: 167 x 41 x 33 mm, H x D1 x D2
• Upper and lower edges with R60 mm rounded profile
• Material: 1.5 mm aluminum alloy with scratch-resistant and fingerprint-resistant surface treatment
  + 1.7 mm aluminum slot for mounting the electronic circuit board
• Designed to incline at an angle of 3.5 degrees when placed on the tabletop
  + 03 aluminum grooves with a diameter of 2.5 mm, spaced at 76.5 mm and 86.5 mm

• Quick-fix mounting mechanism:

• Dimensions: 68.5 x 48 mm
• Spring-loaded elastic mechanism

23. Indicator Light Training Module, with Buzzer – TPAK.A8100

• Compliant with TCVN 5699-1:2010 and IEC 60335-1:2010 standards for power consumption and current, leakage current, and electric strength
• Pilot lights and 1 buzzer
• Can be used for indication and power distribution.
• Power supply: 24 VDC
• Module front panel:

• Printed electronic circuit with instruction graphics, anti-glare surface, and fingerprint-resistant finish
• Device I/O terminals are brought out to an intermediate push-in connector for convenient wiring.

• Device base:

• Dimensions: 167 x 41 x 33 mm, H x D1 x D2
• Upper and lower edges with R60 mm rounded profile
• Material: 1.5 mm aluminum alloy with scratch-resistant and fingerprint-resistant surface treatment
  + 1.7 mm aluminum slot for mounting the electronic circuit board
• Designed to incline at an angle of 3.5 degrees when placed on the tabletop
  + 03 aluminum grooves with a diameter of 2.5 mm, spaced at 76.5 mm and 86.5 mm

• Quick-fix mounting mechanism:

• Dimensions: 68.5 x 48 mm
• Spring-loaded elastic mechanism

24. Time-Delay Relay Installation Training Module, ON-Delay – TPAK.A5100

• Compliant with TCVN 5699-1:2010 and IEC 60335-1:2010 standards for power consumption and current, leakage current, and electric strength
• OMRON components
• Power supply: 100 – 240 VAC / 24 – 240 VDC
• Maximum load current: 5 A
• Module front panel:

• Printed electronic circuit with instruction graphics, anti-glare surface, and fingerprint-resistant finish
• Device I/O terminals are brought out to an intermediate push-in connector for convenient wiring.

• Device base:

• Dimensions: 167 x 41 x 33 mm, H x D1 x D2
• Upper and lower edges with R60 mm rounded profile
• Material: 1.5 mm aluminum alloy with scratch-resistant and fingerprint-resistant surface treatment
  + 1.7 mm aluminum slot for mounting the electronic circuit board
• Designed to incline at an angle of 3.5 degrees when placed on the tabletop
  + 03 aluminum grooves with a diameter of 2.5 mm, spaced at 76.5 mm and 86.5 mm

• Quick-fix mounting mechanism:

• Dimensions: 68.5 x 48 mm
• Spring-loaded elastic mechanism

25. Time-Delay Relay Installation Training Module, OFF-Delay – TPAK.A6100

• Compliant with TCVN 5699-1:2010 and IEC 60335-1:2010 standards for power consumption and current, leakage current, and electric strength
• OMRON components
• Coil voltage: 24 VDC
• Delay time: 0.05 to 12 s
• Module front panel:

• Printed electronic circuit with instruction graphics, anti-glare surface, and fingerprint-resistant finish
• Device I/O terminals are brought out to an intermediate push-in connector for convenient wiring.

• Device base:

• Dimensions: 167 x 41 x 33 mm, H x D1 x D2
• Upper and lower edges with R60 mm rounded profile
• Material: 1.5 mm aluminum alloy with scratch-resistant and fingerprint-resistant surface treatment
  + 1.7 mm aluminum slot for mounting the electronic circuit board
• Designed to incline at an angle of 3.5 degrees when placed on the tabletop
  + 03 aluminum grooves with a diameter of 2.5 mm, spaced at 76.5 mm and 86.5 mm

• Quick-fix mounting mechanism:

• Dimensions: 68.5 x 48 mm
• Spring-loaded elastic mechanism

26. Power Distribution Training Module – TPAK.A2100

• Technical Specifications

• Divided into 6 DC power supply lines
• Each line has 4 connection points using 2 mm plug terminals
• Compliant with TCVN 5699-1:2010 and IEC 60335-1:2010 standards for power consumption and current, leakage current, and electric strength
• Module front panel:

• Printed electronic circuit with instruction graphics, anti-glare surface, and fingerprint-resistant finish
• Device I/O terminals are brought out to an intermediate push-in connector for convenient wiring.

• Device base:

• Dimensions: 167 x 41 x 33 mm, H x D1 x D2
• Upper and lower edges with R60 mm rounded profile
• Material: 1.5 mm aluminum alloy with scratch-resistant and fingerprint-resistant surface treatment
  + 1.7 mm aluminum slot for mounting the electronic circuit board
• Designed to incline at an angle of 3.5 degrees when placed on the tabletop
  + 03 aluminum grooves with a diameter of 2.5 mm, spaced at 76.5 mm and 86.5 mm

• Quick-fix mounting mechanism:

• Dimensions: 68.5 x 48 mm
• Spring-loaded elastic mechanism

27. Counter Training Module – TPAK.A4200

• Component: OMRON
• Coil voltage: 12 – 24 VDC
• Contact: 1 pair
• Counting pulse width: 20 ms
• 4-digit display
• Module front panel:

• Printed electronic circuit with instruction graphics, anti-glare surface, and fingerprint-resistant finish
• Device I/O terminals are brought out to an intermediate push-in connector for convenient wiring.

• Device base:

• Dimensions: 167 x 41 x 33 mm, H x D1 x D2
• Upper and lower edges with R60 mm rounded profile
• Material: 1.5 mm aluminum alloy with scratch-resistant and fingerprint-resistant surface treatment
  + 1.7 mm aluminum slot for mounting the electronic circuit board
• Designed to incline at an angle of 3.5 degrees when placed on the tabletop
  + 03 aluminum grooves with a diameter of 2.5 mm, spaced at 76.5 mm and 86.5 mm

• Quick-fix mounting mechanism:

• Dimensions: 68.5 x 48 mm
• Spring-loaded elastic mechanism

28. Magnetic Proximity Sensor – TPAK.F0100

• Operating voltage: 12 – 24 VDC
• Detection distance: 8 mm ±10%
• Adjustable distance: 0 – 6.4 mm
• Maximum operating frequency: 500 Hz
• Output contact: NO, PNP
• Maximum output current: 200 mA
• Electronic circuit board for electrical connection

29. Capacitive Proximity Sensor – TPAK.F1000

• Dimensions: 95 x 55 x 72 mm, L x W x H
• Operating voltage: 12 – 24 VDC
• Detection distance: 8 mm ±10%
• Adjustable distance: 0 – 5.6 mm
• Maximum operating frequency: 100 Hz
• Output contact: NO, PNP
• Maximum output current: 200 mA
• Current consumption: 15 mA
• Electronic circuit board for electrical connection

30. Photoelectric Proximity Sensor – TPAK.F2000

• Dimensions: 95 x 55 x 72 mm, L x W x H
• Operating voltage: 12 – 24 VDC
• Detection distance: 100 mm
• Response time: 0.5 ms
• Output contact: NPN
• Current consumption: 25 mA
• Output current: 100 mA max.
• Electronic circuit board for electrical connection

31. Electrical Limit Switch – TPAK.F4500

• OMRON device
• Used to detect the end position of the cylinder stroke
• Contact gap: 0.9 mm
• Rated current: 10 A
• 01 NO contact and 01 NC contact in switch configuration

32. PLC S7-1200 Training Module – TPAK.B2100

• Compliant with TCVN 5699-1:2010 and IEC 60335-1:2010 standards for power consumption and current, leakage current, and electric strength
• SIEMENS components
• CPU type: 1214C
• Profinet communication with Ethernet physical interface
• 6 high-speed counters: max. 100 kHz
• Number of digital inputs: 14 DI
• Number of digital outputs: 10 DO
• Digital input/output type: transistor
• Number of analog inputs: 2 AI, voltage range 0 – 10 V
• Power supply: 24 VDC
• Module front panel:

• Printed electronic circuit with instruction graphics, anti-glare surface, and fingerprint-resistant finish
• Device I/O terminals are brought out to an intermediate push-in connector for convenient wiring.

• Device base:

• Dimensions: 167 x 41 x 33 mm, H x D1 x D2
• Upper and lower edges with R60 mm rounded profile
• Material: 1.5 mm aluminum alloy with scratch-resistant and fingerprint-resistant surface treatment
  + 1.7 mm aluminum slot for mounting the electronic circuit board
• Designed to incline at an angle of 3.5 degrees when placed on the tabletop
  + 03 aluminum grooves with a diameter of 2.5 mm, spaced at 76.5 mm and 86.5 mm

• Quick-fix mounting mechanism:

• Dimensions: 68.5 x 48 mm
• Spring-loaded elastic mechanism

Electro-Pneumatic Converters

33. Pressure-to-Electrical Switch – TPAK.F4300

• Maximum working pressure: 0.7 MPa
• Adjustment range: 0.1 – 0.4 MPa
• Actual pressure display included
• Electronic circuit board for electrical connection

34. Pressure-to-Electrical Switch, Transistor Output – TPAK.F4400

• Power supply: 12 – 24 VDC
• Current consumption: 17 mA
• Output: PNP
• Adjustment range: 0 – 1 MPa
• Withstand pressure: 1.5 MPa
• Quick connector size: 1/8”
• Response time: 5 ms
• Electronic circuit board for electrical connection

35. Pressure Gauge with Integrated Pressure Switch – TPAK.F5000

• Working pressure: 0 – 1 MPa
• Adjustment range: 0.1 – 0.8 MPa
• Quick connector size: 1/8”
• Dual-pointer pressure gauge: one pointer indicates actual pressure, and the other is used to set the switching pressure.
• Electronic circuit board for electrical connection

Accessories

36. Pneumatic Tube – TU0425BU-20

• Quantity: 1 roll/set
• Material: polyurethane, with good bending and abrasion resistance.
• Diameter: 4 mm
• Length: 20 m

37. Set of 10 T-Connectors – KQ2T04-00A

• Quantity: 10 pieces/set
• Connector size: 4 mm

38. Set of 10 End Caps, 4 mm – KQ2P-04

• Quantity: 10 pieces/set
• Diameter: 4 mm

39. Tube Cutter – TK-3

• Capable of cutting 3 tube sizes: Ø4 mm, Ø6 mm, and Ø8 mm
• Quantity: 1 piece/set

40. Tube Removal Tool – TG-1

• Capable of removing 2 tube sizes: Ø4 mm and Ø6 mm
• Quantity: 1 piece/set

41. Set of 10 Y-Connectors – KQ2U04-00A

• Quantity: 10 pieces/set
• Connector size: 4 mm

42. Practical Training Manual Set

Includes:

• 01 equipment operation and maintenance manual
• 01 practical training textbook with detailed instructions and research content for practical exercises.

43. Dedicated Training Table for Pneumatic and Electro-Pneumatic Training – TPAB.M2110

• Technical Specifications

• Overall dimensions: 1280 x 766 x 1600 mm, L x W x H
• The table consists of 2 main sections: mobile practice table and pneumatic mounting panel
• Mobile practice table

• Overall dimensions: 1280 x 766 x 860 mm, L x W x H
• Material: CT3 powder-coated steel combined with aluminum profiles
  + 4 corners made of molded aluminum profiles, dimensions 710 x 92 x 92 mm, R42 mm rounded corners, and 11 holes with a diameter of 6.8 mm
• Divided into 2 compartments: compartment 1 includes 04 equipment storage drawers; compartment 2 is a large compartment for storing larger devices
  + 04 CT3 powder-coated steel doors, dimensions 728 x 463 x 40 mm, with transparent mica panels, dimensions 638 x 372 x 3 mm, for observing the equipment inside
• Cabinet side panels made of CT3 powder-coated steel, dimensions 755 x 547 x 120 mm, with 160-degree folded edges and 06 slotted mounting holes
• Table legs equipped with casters and locking brakes.
• LED lighting inside the cabinet for convenient item searching
• Tabletop:
  . Dimensions: 1136 x 766 x 25 mm, L x W x H
  . Material: engineered wood with scratch-resistant and insulating coating.
• Test lead holder
  . Includes 02 cable hanging racks.
  . Material: stainless steel, 2 mm thick, with scratch-resistant surface.
  . Capacity: up to 40 leads
• Pneumatic mounting panel support frame
  . Support frame made of aluminum combined with CT3 powder-coated steel
  . 02 aluminum bars with R25 mm rounded profile, length 1500 mm
  . 01 CT3 steel bar, dimensions 1499 x 46.5 x 100 mm

• Pneumatic mounting panel

• Vertical mounting rack for pneumatic devices:
  . Dimensions: 1133 x 30 x 406 mm, L x W x H.
  . Mounting rack material: assembled from 03 aluminum profile bars, dimensions 1073 x 137 x 24.5 mm, anodized for scratch resistance and aesthetics, with specialized assembly structure.
  . Both sides of the aluminum bar include 3 slots, each 8.2 mm wide and 21.7 mm deep, spaced 44.4 mm apart
  . Practical training devices can be mounted from both sides.
• Inclined mounting rack for pneumatic devices:
  . 02 symmetrical racks
  . Inclination angle: 60 degrees relative to the tabletop
  . Dimensions: 1133 x 30 x 297 mm, L x W x H.
  . Mounting rack material: assembled from 02 aluminum profile bars, dimensions 1073 x 137 x 24.5 mm, anodized for scratch resistance and aesthetics, with specialized assembly structure.
  . Both sides of the aluminum bar include 3 slots, each 8.2 mm wide and 21.7 mm deep, spaced 44.4 mm apart
• Mounting rack for electrical devices:
  . Dimensions: 1144 x 92 x 80.5 mm
  . Mounting rack material: 2 mm thick anodized aluminum profile, ensuring scratch resistance and aesthetics, with specialized assembly structure.
  . Aluminum plate dimensions: 86 x 13.4 x 1136 mm, with module mounting positions spaced at 18 mm, 12 mm, 24.5 mm, and 26.5 mm
  . Includes 2 aluminum bars, allowing practical training devices to be mounted from both sides.

• Main Components:

• 01 tabletop
• 01 mobile practice table
• 01 vertical mounting rack for pneumatic devices:
• 02 inclined mounting racks for pneumatic devices:
• 01 mounting rack for electrical devices:
• 02 test lead holders

44. Air Compressor with Storage Tank – TPAK.C0101

• Dedicated laboratory air compressor with very low noise level

• Technical Specifications

• Dimensions: 600 x 300 x 600 mm, L x W x H
• Dedicated laboratory air compressor with very low noise level
• Operating voltage: 220 VAC, 50 Hz
• Power: 550 W
• Tank capacity: 30 L

• Main Components:

• 01 silent air compressor
• 01 quick connector
• 01 air hose
• 01 air hose

45. ETEK-Lab Digitalization and Practice Support Software

a. General Features

• Vietnamese-language interface, user-friendly and easy to use.
• Web-based operation, accessible through an Internet browser.
• Allows access anytime and anywhere using a personal account.
• Supports login with individual usernames and passwords for each user.
• Supports role-based access control for different user groups, including teachers and students.
• Supports storage and use of lecture content, learning materials, and practical training documents.
• Course content, lectures, and practical exercises can be continuously updated by users.
• Supports effective use of theoretical materials and practical content associated with training equipment.
• Software data is deployed on the supplier’s Cloud Server.
• The software has a Copyright Registration Certificate issued by the Copyright Office.

b. Lecture Development Support Functions

• Import lecture content from Word files.
• Create and edit lectures directly on the software.
• Support insertion of visual illustrative images.
• Support multiple types of multiple-choice questions.
• Allow development of a question bank for testing and assessment.
• Manage lecture content.

c. Integration of AI Technology to Support Teaching

• The software integrates artificial intelligence, AI, technology to support teachers in developing training content, preparing lectures, and designing tests.
• AI helps reduce lesson preparation time and supports fast, systematic, and effective development of training content.
• Supports the development of lecture structures based on topics or subject content.
• Automatically generates key lecture components, including learning objectives, knowledge content, illustrative examples, and discussion questions.
• Supports summarizing long documents into key teaching content.
• Supports converting technical documents into lecture content that is easier for students to understand.
• Supports editing and improving lectures, as well as adding illustrative examples or real-world scenarios.
• Generates illustrative images and visual diagrams suitable for lesson content.
• Automatically generates test questions from lecture content, including multiple-choice, true/false, matching, and fill-in-the-blank questions.

d. Simulation

• Simulation of actuator operation: screw motor
• Simulation of actuator operation: gear motor
• Simulation of actuator operation: turbine motor
• Simulation of actuator operation: vane motor
• Simulation of distribution device operation: air manifold
• Simulation of distribution device operation: air tank
• Simulation of valve operation: 3/2-way valve controlled by a sensing probe
• Simulation of valve operation: 3/2-way valve controlled by a foot pedal
• Simulation of valve operation: 3/2-way valve controlled by a limit switch
• Simulation of valve operation: 3/2-way valve controlled by pneumatic actuation, direct control and assisted-valve control
• Simulation of valve operation: 3/2-way valve controlled by electro-pneumatic actuation, direct control and assisted-valve control
• Simulation of valve operation: 4/2-way valve controlled by a switch
• Simulation of valve operation: 4/2-way valve controlled by a sensing probe
• Simulation of valve operation: 4/2-way valve controlled by single-sided pneumatic actuation
• Simulation of valve operation: 4/2-way valve controlled by single-sided electro-pneumatic actuation
• Simulation of valve operation: 5/2-way valve controlled by single-sided pneumatic actuation
• Simulation of valve operation: 5/2-way valve controlled by single-sided electro-pneumatic actuation
• Simulation of valve operation: 5/3-way valve controlled by double-sided pneumatic actuation
• Simulation of valve operation: 5/3-way valve controlled by double-sided electro-pneumatic actuation
• Simulation of valve operation: OR logic valve
• Simulation of valve operation: AND logic valve
• Simulation of valve operation: one-way valve, non-adjustable and adjustable types
• Simulation of valve operation: quick exhaust valve
• Simulation of valve operation: vacuum valve
• Simulation of valve operation: slow-closing time control valve
• Simulation of valve operation: slow-opening time control valve
• Simulation of pneumatic control circuit operation: manual control, direct and indirect
• Simulation of pneumatic control circuit operation: time-based control, semi-automatic and automatic
• Simulation of pneumatic control circuit operation: stroke-based control, automatic
• Simulation of pneumatic control circuit operation: sequence-based control, automatic
• Simulation of electro-pneumatic control circuit operation: manual control, direct and indirect
• Simulation of electro-pneumatic control circuit operation: time-based control, semi-automatic and automatic
• Simulation of electro-pneumatic control circuit operation: stroke-based control, automatic
• Simulation of electro-pneumatic control circuit operation: cascade control, automatic
• Simulation of electro-pneumatic control circuit operation: sequence-based control, automatic
• Simulation of electro-pneumatic machine control circuit operation: circuit assembly and operation of a workpiece feeding station, non-automatic and automatic
• Simulation of electro-pneumatic machine control circuit operation: circuit assembly and operation of a drilling station, non-automatic and automatic